Certificación ISO 9000

710C

Bravo Line

Add to your field the advantages of a BRAVO, the Pauny line with the highest hydraulic capacity and efficiency in fuel consumption. Specially developed for direct sowing, pneumatic, with variable flow. It incorporates state-of-the-art tools that allow minimum compaction with greater traction capacity.

Its modern fully pressurized cabin, with panoramic vision and equipped for maximum comfort and operator safety, optimizes the excellent field work.

More about this product

080077 PAUNY (72869)

Technical specifications

Engine

Brand/Model:
Cummins / QSC 8.3

Power:

Engine power at rated speed kw (HP):
227 (305)

Type:
Diesel 4 times.

Maximum rated speed (rpm):
2200

Maximum torque (Nm):
1383

Maximum torque pattern (rpm):
1500

Number of cylinders:
6 aligned.

Displacement (cm3):
8270

Aspiration:
Turbo supercharged post-cooled.

Diameter / Stroke (mm):
114 / 135

Compression ratio:
17,5:1

Injection:
Electronic. Common rail.

Cooling system:
By liquid under pressure, with thermostat. With deaeration system.

Starting system:
Electric 12 V, with ignition key, safety switch and fuse.

Torque reserve (%):

Minimum consumption (g / kw.h):

Lubrication:

Air filter:

Exhaust system:

Transmission

Type:
Helical gears in constant shot, with four (4) trees arranged in cascade. Semi-synchronized coupling by internal gears of manual operation by means of three (3) levers.

Gearbox:
Number of speeds: three (3) forward gears and one (1) reverse gear, which combined with the four ranges total twelve (12) forward gears and four (4) reverse gears.

Front axle:
Epicyclic-type final reduction. Internal, next to the differential gear. Number of satellites: three (3). Transmission ratio: 6.23:1. Ring gear and conical pinions ratio: 4.11:1.

Rear axle:
Epicyclic-type final reduction. Internal, next to the differential gear. Number of satellites: three (3). Transmission ratio: 6.23:1. Ring gear and conical pinions ratio: 4.11:1.

Pressure of the steering system (mpa):

Speeds:

Brand:

Model:

Differential lock (NoSPin):

Torque ratio:

Maximum input speed (r.p.m.):

Maximum allowable engine torque (Nm):

Clutch

Type:
Dry friction type, with pedal mechanical drive.

Disc diameter: PTO / Transmission
15'' (380 mm) dual disc.

Hydraulic System

Type:
Hidro Max hydraulic system. Closed center, with 2 piston pumps of 63 m³/rev.

Maximum flow rate (l / min):
310 at 2300 rpm of the engine.

Flow rate (l / min):

Maximum working pressure (bar):
200

Working pressure (Mpa):

Steering system pressure (Mpa):

Relief pressure:

Remote control:
4 outputs for double-effect cylinders, with independent drive for pneumatic turbine.

Fluid reservoir:
Independent.

Steering hydraulics:

Hydraulic cylinders:

Filter system:
Double filter with metallic mesh in section and double filter base in return.

Valve bank:

Electric System

Voltage (V):
12 V, with negative to ground.

Alternator (A):
12 V, 110 A, with built-in voltage regulator.

Battery (Ah):
One (1) of 12 V and 160 Ah.

Power Take-Off

Type:
Manual mechanical drive. Rated speed 540 rpm. / Opt.: 1000 rpm.

PTO Speed:
540 rpm.

Drawbar:

Capacities and Weight

Fuel tank (reservoir) (l):
521

Tank with front PTO:

Auxiliary tank:

Hydraulic fluid tank (l):
200

Crankcase included oil filter (l):
20

Gearbox (l):
20

Rear differential (l):
60

Gearbox and rear differential (l):

Front differential (l):
50

Transmission (l):

Transmission (kg):

Transmission and rear differential (l):

Front axle (differential / hubs):

Weight without ballast in start command (kg):
9866

Weight with ballast with water in the covers and full fuel tank (kg):
14666

Nominal load (kg):

Operating weight (kg):

Bucket capacity (l):

Traction cycle time:

Maximum tractive force (kN):

Maximum displacement force:

Front wheel hub each (l):

Lubricant capacity (without radiator) (l):

Base machine weight (kg):

Front axle (kg):

Rear axle (kg):

Maximum weight (kg):

Total cycle time (s):

Articulation and Pivoting

Type:
Through three-point support; ball joint with articulation and pivoting.

Steering angle (°):
70° (± 35° from the center)

Articulation angle (°):

Minimum turning radius (mm):

Total pivoting angle (°):
30° (± 15° from the center)

Brakes

Service brakes:
Disc on transmission output, with hydraulic drive.

Parking brakes:
Commanded by lever on the service brake.

Traction

Simple / Double:
Double.

Tire Sizes

Front / Rear:
460/85R38 / 23.1 x 30 (12 screens) double.

Front :

Rear:

Type:

Tires:

Rims:

Chassis

Type of chassis:

Operator´s Station

Type:

Steering:
Sensitive hydrostatic, on the joint.

Cabin:
Anti-roll, hermetic and soundproof, mounted on anti-vibration rubber blocks. With A/C cold/heat.

Characteristics of the steering column:

Board:
Compact analog, with analog indicators of: engine rpm, cooling temperature, fuel level. Light indications: low oil pressure, clogged air filter, over coolant temperature, low fuel level, triggered hand brake, alternator failure, power take-off activated,

Light switch:
Hermetic single control keyboard.

Seat:
Anatomical, with horizontal regulation by weight of the operator.

Theoretical Speeds

Dimensions

Axle spacing (mm):
3308

Total dimension (mm):

Total length (mm):
6415

Maximum height (mm):
3553

Max. dumping height (mm):

Dumping reach (mm):

Ground clearance (mm):
538

Height at the steering (mm):

Minimum wheel track (mm):
1800

Maximum wheel track (mm):

Maximum single wheel track (mm):

Front wheel track (mm):

Rear wheel track (mm):

Wheel track (mm):

Maximum width (mm):

Total width with single wheels (mm):
2390 / 2790

Total width with dual (mm):
3660

Max single / dual width (mm):

Length with bucket (mm):

Total width (mm):

Maximum single / dual wheel track (mm):
2200 / 3070

Maximum wheel track with dual (mm):

Maximum height at the steering (mm):

Travel Speed

Travel speed - Forward km/h):

Travel speed - Reverse (km/h):

Axles

Front axle:

Rear axle:

Front Loader Capacities

Bucket capacity - struck (m3):

Bucket capacity - heaped (m3):

Loading reach (m):

Dumping height (m):

Total operating height (m):

Turning angle (°):

Dumping angle (°):

Backhoe Capacities

Reach from central articulation (m):

Loading reach (m):

Operating height (m):

Digging depth (m):

Digging depth with flat bottom (m):

Arm folding force (kgf):

Turning arc (°):

Bucket penetration force (kgf):

Standard bucket width:

Loading height (m):

Operational Data

Transport height (m):

Transport width (m):

Transport length (m):

Axle spacing (m):

Cabin height (m):

Operating weight (kg):

Lights

Front Lights:

Rear Lights:

Attachment

Hydraulic lift
(Three point hitch):

Drawbar:

Category:

Lower Boards:

Other

Traction:

Ballast:

Standard Equipment

Backup Camera:

Hydraulic decoupling of the bucket from the cab:

Lights for night work:

Air conditioning:

Third hydraulic way for bale spear:

Tandem

Type:

Thickness (mm):

Chain drive step (mm):

Axle spacing (mm):

Oscillation (°):

Type of bearings:

Moldboard

Tipo:

Dimensiones (mm):

Presión máxima de la hoja (eq. estándar)(kg):

Alcance máximo por fuera de las ruedas (mm):

Ángulo máximo para corte de talud (°):

Operaciones:

Elevación de la cuchilla:

Desplazamiento lateral:

Inclinación de la hoja:

Máxima elevación sobre el suelo (mm):

Desplazamiento lat. del centro del circulo (mm):

Desplazamiento lat. de la vertedera (mm):

Cantoneras:

Rieles:

Scarifier

Number of teeth:

Working width (mm):

Drawbar:

Ripper:

Circle

Type:

External diameter (mm):

Rotation (continuous) (°):

Supports:

Thickness (mm):

Circle drive:

Frontal excavator blade

Type:

Compactor wheels

Type:

Extra Equipment

Mud scraper kit:

Full lower enclosure:

Hydraulic tank enclosure:

Optional Elements

3 point hydraulic lift:

Rear hitch for trailer:

Air conditioner:

Sunshade roof:

Closed cabin:

Hydraulic elevator:

Counterweight:

Hydraulic equipment:

Drawbar:



LEAVE YOUR DATA TO DOWNLOAD THE CATALOG